logo
Up to 5 files, each 10M size is supported. OK
Beijing Qinrunze Environmental Protection Technology Co., Ltd. 86-159-1063-1923 heyong@qinrunze.com
News Get a Quote
Home - News - Daily maintenance and upkeep measures for sodium hypochlorite generator

Daily maintenance and upkeep measures for sodium hypochlorite generator

December 14, 2024

Sodium hypochlorite generator is a common water treatment disinfection and sterilization equipment on the market. Like other equipment, maintenance and upkeep measures should be taken for the sodium hypochlorite generator during daily use to ensure its normal operation and extend its service life. The common maintenance and upkeep measures are as follows:
During the electrolytic reaction process of the equipment, the effective chlorine content should be kept within one percent, because if the chlorine content is too high, it will not only affect the reaction results of the treatment, but also the service life of the electrode.
In daily use, due to the high content of calcium and iron ions in water in some areas, impurities such as CACO3 and Fe (oH) 3 may appear during electrolysis. These impurities may cause short circuits between the anode and cathode or even breakdown of the electrode in water. So, users should regularly clean their equipment according to the local water quality situation, keep the equipment clean, and avoid the accumulation of impurities.
When cleaning the titanium anode used in the sodium hypochlorite generator, be sure to handle it gently. When cleaning, use a brush to gently sweep away the dirt on the surface, avoid scratching with sharp tools, and avoid damaging the surface coating of the titanium anode.
During the operation of the equipment, it is necessary to frequently observe whether the point current and voltage of the equipment are within the specified range. Timely monitor the flow of hydrochloric acid solution and cooling water to prevent blockage.
After 20 hours of operation, the equipment needs to be shut down for inspection. Close the salt water valve of the equipment, empty the chlorine gas in the electrolytic cell, and open the flushing valve for flushing. After flushing, close the flushing valve and drain it, open the saltwater valve, and prepare the equipment for start-up.
The sodium hypochlorite generator should be installed in a well ventilated and well lit indoor environment during the installation process, and the surrounding area should be kept clean without any debris piled up. The hydrogen exhaust pipeline should be placed outdoors, and open flames or other sources of ignition should be avoided around it. Smoking and open flames are strictly prohibited indoors.

 

Main technical parameters of disinfectant machine (sodium hypochlorite generator):
The pH value of the disinfectant produced by this machine is 6, which is weakly acidic. It not only has good bactericidal effect but also has no irritation to the skin, making it a non-toxic product; This indicator is at a leading level internationally; 2. Produce 8L (6000mg/L) disinfectant solution every 2 hours, with a power consumption of 0.27 kWh, precious metal electrode, and adjustable concentration in three levels; 3. It is made on site, ready to use and convenient to use; 4. Sterilization effect: The sterilization rate of Escherichia coli, Staphylococcus aureus, hepatitis B surface antigen, Bacillus subtilis var. niger spores, anthrax spores and other viruses can reach 99.99% -100%. It has a bactericidal effect of 99% -100% against various viruses such as avian influenza, Marek's disease, Newcastle disease, avian influenza, bursal disease, foot-and-mouth disease, swine blister, swine erysipelas, etc; 5. Machine weight: 9kg, external dimensions: 600 × 340 × 560mm, electrolytic cell volume: 8L; 6. Shelf life of three years, lifetime maintenance service.

 


Main technical parameters of disinfectant machine (sodium hypochlorite generator): 1. The pH value of the disinfectant produced by this machine is 6, which is weakly acidic. It not only has good sterilization effect but also has no irritation to the skin, making it a non-toxic product; This indicator is at a leading level internationally; 2. It is made on site, ready to use and convenient to use; The effective chlorine concentration can be adjusted from 3000-8000PPM; 3. Computer control with automatic protection device; Automatic alarm, equipped with forced cooling and heat dissipation device, digital display of current and time, and remote control for full remote control operation; 4. Sterilization effect: The sterilization rate of Escherichia coli, Staphylococcus aureus, hepatitis B surface antigen, Bacillus subtilis var. niger spores, anthrax spores and other viruses can reach 99.99% -100%. It has a bactericidal effect of 99% -100% against various viruses such as avian influenza, Marek's disease, Newcastle disease, avian influenza, bursal disease, foot-and-mouth disease, swine blister, swine erysipelas, etc; 5. Electrolytic cell capacity: 8L, alloy cathode, non rusting, ultra long service life; 6. Machine weight: 10kg, external dimensions: 600 × 340 × 560mm; 7. Rated power supply: AC220V ± 10%, 50Hz, power consumption: 110-150W.